[Coco] LWTools & Nitros9 Build
Bill Pierce
ooogalapasooo at aol.com
Mon Jan 19 20:54:15 EST 2015
Bill let me know when you have it ready to test and I'll gladly run it through the gauntlet :-)
Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com
-----Original Message-----
From: Bill Nobel <b_nobel at hotmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Mon, Jan 19, 2015 8:45 pm
Subject: Re: [Coco] LWTools & Nitros9 Build
YES, Thank you all for the pointers, I have it compiling now. We may see Level
3 in the next couple of weeks in a beta test!!!!
Bill Nobel
> On Jan 19, 2015, at 6:56 PM, Robert Gault <robert.gault at att.net> wrote:
>
> Bill Nobel wrote:
>> Well I somewhat have it working, I start the build and it trucks along for a
bit then stops on ‘level1/coco1/cmds no rule to make target basic09’ I have 3rd
party stuff installed in ~/Coco3/Nitros9-v3.3.0 3rd party’ same as Nitros9?
>>
>> Bill Nobel
>
> That is typical. :) Make sure that the 3rdparty/packages/basic09 has an
explicit path to NITROS9DIR in its make file such as:
>
> ifndef NITROS9DIR
> NITROS9DIR = $(HOME)/nitros9_version_something
> endif
>
> or
>
> use ../../../rules.mak
>
> in the case of 3rdparty/packages/basic09 .
>
> Alternatively, you could pre-assemble 3rdparty/packages/basic09 although you
will still have to deal with a pathname to rules.mak. Or start your assembly in
the root directory of NitrOS-9.
>
> Robert
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list