[Coco] Speech and Sound Cartridge under NitrOS9
K. Pruitt
pruittk at roadrunner.com
Thu Dec 31 19:29:26 EST 2015
I took the code out which sets the sound multiplexer to cartridge input and
now it works. I don't know why. I don't have a clue what a sound multiplexer
is but the addresses are in the PIAs. Ongoing fun with the CoCo.
----- Original Message -----
From: "K. Pruitt" <pruittk at roadrunner.com>
To: <Coco at maltedmedia.com>
Sent: Wednesday, December 30, 2015 8:34 AM
Subject: [Coco] Speech and Sound Cartridge under NitrOS9
> Is it at all possible to operate an UNMODIFIED speech and sound cartridge
> under NitrOS9 Level 2?
>
> Here's what I am doing... I am halting the interrupts and dropping the
> CoCo down to 0.89Mhz. This allows the Speech and Sound cartridge to speak
> under Level 2.
>
> I'm happy to post the code I am using, but it's just the BASIC listing
> starting on page 5 of the device's manual translated in to assembly.
>
> This works fine under stock Level 2 OS-9 but leaves the system unstable.
> It works on NitrOS9 fine as far as speaking goes, but it never gets to the
> point of turning the interrupts back on and returning the CoCo to 1.79Mhz.
> A reset is required to recover from the hang-up as the interrupts are off
> .
> By the way, I use this method of turning off the interrupts and dropping
> the CoCo down to 0.89Mhz quite successfully with the Plug 'n Power
> controller. I've been running it for a couple of years now under NitrOS9
> and is hasn't failed me once or caused any issues with the OS.
>
> I installed the speech and sound cartridge drivers to play around with
> them (I assume they are for the modified cartridge) but when they are
> installed NitrOS9 won't boot for me. If I just load the drivers I get an
> error 207 when I try and send something to them. This takes place no
> matter if the Speech and Sound cartridge is plugged in or not.
>
> I'm just screwing around with the sound and speech cartridge here and am
> just curious if what I an trying is even possible to pull off. If anybody
> would care to chime in on the speech and sound cartridge I would really
> appreciate the input.
>
> Thanks
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
More information about the Coco
mailing list