[Coco] FPGA 6809

[Dave Philipsen]

So do you have one of the EP2C5 boards that Grant uses?  I bought a 
couple of them off eBay for around 16 bucks ea. including shipping from 
China.  Then I bought a couple of EP4CE10 boards from another company 
for around 32 bucks apiece and I was able to port over Grant's code 
pretty much by just re-assigning the pins.  It was also the same case 
with the Terasic DE1.  So I've got the Multicomp 6809 running on three 
different platforms.  At some point I'll publish some changes I made to 
Grant's code.  For one thing I added an MMU that is functionally 
identical to the CoCo 3 MMU so that hopefully it won't take much to get 
NitrOS9 Level 2 running on it.  I'm not looking to have all of the fancy 
graphics windows and stuff nor do I even need multiple windows.  One of 
the things I like about Grant's implementation is the VGA/CGA 
implementation.  It's nice to have some of those IBM line graphics 
characters in the character set.

Dave Philipsen


On 8/31/2015 12:19 AM, Bill Nobel wrote:
> That is correct.  I would like to achieve various 6809 systems (the main being a Coco).  Yes Roger & Gary Becker have their projects going (I prefer Gary’s better) I tried taking Grant’s code direct to De0 with pin re-assingment. This didn’t work under newest versions of Quartus, so I have been trying to fix the varieties for my own sentiment.  Once I have them working Everyone gets.
>
> Bill Nobel
>
>> On Aug 30, 2015, at 10:58 PM, Dave Philipsen <dave at davebiz.com> wrote:
>>
>> Interesting.  So when you are speaking in terms of "bdf" does that mean you are actually drawing a schematic for your implementation?
>>
>> Dave
>>
>>
>> On 8/30/2015 11:52 PM, Bill Nobel wrote:
>>> Exactly what I am talking about David.  Grant defines his CS lines in code vs .bdf (or symbols) My knowledge of FPGA’s is in schematic form.
>>>
>>> Bill Nobel
>>>
>>>> On Aug 30, 2015, at 10:46 PM, Dave Philipsen <dave at davebiz.com> wrote:
>>>>
>>>> Actually, I stand corrected.  Grant doesn't actually "marry" the buses in his project and he explains why on his website:
>>>>
>>>> Similarly, all these CPUs have an 8-bit data bus. For the discrete components, the data bus is bidirectional. This could have been implemented in VHDL as bidirectional to match. However, the VHDL components (including RAM and ROM) tend to have separate incoming and outgoing data buses - this makes it easier to interface. Therefore the 8-bit data bus found on a CPU is represented as two separate data buses and are connected to the two data buses on the breadboard.
>>>>
>>>> eg
>>>> di => cpuDataIn,
>>>> do => cpuDataOut
>>>>
>>>>
>>>>
>>>> This code in Multicomp attaches the different peripherals to the CPU read data bus when the respective chip select goes low:
>>>>
>>>> cpuDataIn <=
>>>> interface1DataOut when n_interface1CS = '0' else
>>>> interface2DataOut when n_interface2CS = '0' else
>>>> sdCardDataOut when n_sdCardCS = '0' else
>>>> basRomData when n_basRomCS = '0' else
>>>> internalRam1DataOut when n_internalRam1CS= '0' else
>>>> sramData when n_externalRamCS= '0' else
>>>> x"FF";
>>>>
>>>>
>>>> An example of connecting the CPU write data bus to an external RAM chip is found here:
>>>>
>>>> sramAddress(15 downto 0) <= cpuAddress(15 downto 0);
>>>> sramData <= cpuDataOut when n_WR='0' else (others => 'Z');
>>>> n_sRamWE <= n_memWR;
>>>> n_sRamOE <= n_memRD;
>>>> n_sRamCS <= n_externalRamCS;
>>>>
>>>> This is the way he keeps it flexible in order to work with both the "internal" VHDL devices which may use separate data buses as well as the real external devices that normally use a single bi-directional bus.  Additionally, there are some physical devices which do not require the chip select to be active in order to perform a write operation.
>>>>
>>>> Dave Philipsen
>>>>
>>>>
>>>>
>>>>
>>>> On 8/30/2015 10:42 PM, Bill Nobel wrote:
>>>>> I have gone over Grants code extensively and I never found a symbol file for Chip select. I see the CS lines defined, but not such as Roger’s define for a symbol file.
>>>>>
>>>>> Bill Nobel
>>>>>
>>>>>> On Aug 30, 2015, at 9:23 PM, Dave Philipsen <dave at davebiz.com> wrote:
>>>>>>
>>>>>> If you take a look at the VHDL code in Grant Searle's Multicomp project you'll find an example of this too.
>>>>>>
>>>>>> Dave Philipsen
>>>>>>
>>>>>>
>>>>>> On 8/30/2015 8:53 PM, Bill Nobel wrote:
>>>>>>> I have to post this here,  A HUGE shout out to Roger Taylor for directing me in the right direction for the bus marriage on the FPGA versions of the 6809.  I am a noob when it comes to these things and was having trouble marrying the data_in data_out busses together to form a actual bi-directional bus.  I thought I was needing to build a circuit with latches/buffers, and he decides to give me a ~20 line piece of vhdl code that does the whole works based on Chip selects. Woo hoo….
>>>>>>>
>>>>>>> Bill Nobel
>>>>>>>
>>>>>>>
>>>>>> ---
>>>>>> This email has been checked for viruses by Avast antivirus software.
>>>>>> https://www.avast.com/antivirus
>>>>>>
>>>>>>
>>>>>> -- 
>>>>>> Coco mailing list
>>>>>> Coco at maltedmedia.com
>>>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>>
>>>> ---
>>>> This email has been checked for viruses by Avast antivirus software.
>>>> https://www.avast.com/antivirus
>>>>
>>>> -- 
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>>
>>
>> -- 
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus