[Coco] Run of RGB2VGA boards

[Zippster]

Hi everyone,

I received the PCBs for the run and put one together.  
They look and work great, so everything is on track.  :)

Couple of pics…

PCBs…
<https://drive.google.com/open?id=0B1sgl615FlGnLUJzNmwtZE1LME0 <https://drive.google.com/open?id=0B1sgl615FlGnLUJzNmwtZE1LME0>>
<https://drive.google.com/open?id=0B1sgl615FlGnZGJHODZSZXFZZzA <https://drive.google.com/open?id=0B1sgl615FlGnZGJHODZSZXFZZzA>>

Assembled...
<https://drive.google.com/open?id=0B1sgl615FlGnUzNwejVvY0dSeHc <https://drive.google.com/open?id=0B1sgl615FlGnUzNwejVvY0dSeHc>>

- Ed


>> On Aug 15, 2015, at 9:18 AM, Zippster <zippster278 at gmail.com> wrote:
>> 
>> RGB2VGA Special Edition PCBs
>> 
>> 
>> I've made some minor improvements to the RGB2VGA PCB, mostly aesthetic,
>> 
>> with some changes to part footprints to ease assembly as well.
>> 
>> Nothing has been changed in the circuit, functionally they will be the same as before.
>> 
>> 
>> Changes:
>> Some part placements adjusted for cleaner layout,
>> adjusted some part footprints for cleaner layout and assembly,
>> manual re-routing of all the traces on the board,
>> revised the silkscreen for a cleaner look,
>> revised silkscreen to reflect Roger Taylor's improved resistor values,
>> mitered PCB corners,
>> anything else I noticed that could use a tweak.
>> 
>> 
>> I'm going to have these fabricated with white solder mask and black silkscreen. They'll be the
>> 
>> PCBs used in the current run I'm doing for the group. I will order some extra PCBs that will be
>> 
>> available to people who want to build their own, cost will be slightly lower than the OSH Park boards ($10ea).
>> 
>> 
>> Pics here…
>> <https://drive.google.com/open?id=0B1sgl615FlGnfmdNZ1pYVlVPXzBMWmVZaGpXdDdYX0FacG5Yd3Z4ZFphQmpmbVFiXzVsekU <https://drive.google.com/open?id=0B1sgl615FlGnfmdNZ1pYVlVPXzBMWmVZaGpXdDdYX0FacG5Yd3Z4ZFphQmpmbVFiXzVsekU>>
>> 
>> 
>> - Ed
>> 
>> -- 
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco