[Coco] Run of RGB2VGA boards

[Louis Ciotti]

Ed, I will take this in place of the assembled converter.   

Sent from my iPhone

> On Aug 15, 2015, at 12:18 PM, Zippster <zippster278 at gmail.com> wrote:
> 
> RGB2VGA Special Edition PCBs
> 
> 
> I've made some minor improvements to the RGB2VGA PCB, mostly aesthetic,
> 
> with some changes to part footprints to ease assembly as well.
> 
> Nothing has been changed in the circuit, functionally they will be the same as before.
> 
> 
> Changes:
> Some part placements adjusted for cleaner layout,
> adjusted some part footprints for cleaner layout and assembly,
> manual re-routing of all the traces on the board,
> revised the silkscreen for a cleaner look,
> revised silkscreen to reflect Roger Taylor's improved resistor values,
> mitered PCB corners,
> anything else I noticed that could use a tweak.
> 
> 
> I'm going to have these fabricated with white solder mask and black silkscreen. They'll be the
> 
> PCBs used in the current run I'm doing for the group. I will order some extra PCBs that will be
> 
> available to people who want to build their own, cost will be slightly lower than the OSH Park boards ($10ea).
> 
> 
> Pics here…
> <https://drive.google.com/open?id=0B1sgl615FlGnfmdNZ1pYVlVPXzBMWmVZaGpXdDdYX0FacG5Yd3Z4ZFphQmpmbVFiXzVsekU <https://drive.google.com/open?id=0B1sgl615FlGnfmdNZ1pYVlVPXzBMWmVZaGpXdDdYX0FacG5Yd3Z4ZFphQmpmbVFiXzVsekU>>
> 
> 
> - Ed
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco