[Coco] MC6847 + Component video

Wed Apr 29 10:59:55 EDT 2015

What about one of these:

http://www.amazon.com/TecNec-3-5mm-Composite-Stereo-Camcorder/dp/B009X6EQFW

Very small on the CoCo side

> 
>     On April 29, 2015 at 9:40 AM Joe Grubbs <jsgrubbs at hotmail.com> wrote:
> 
> 
>     That one would work great if audio was handled elsewhere. To incorporate
> audio, this is the one I was thinking of:
> 
>    http://www.ebay.com/itm/COMPONENT-A-V-CABLE-FOR-H25-DIRECTV-RECEIVER-H25-10PIN-HD-RGB-AUDIO-VIDEO-/281424904178
> 
> 
> 
>     > From: zippster278 at gmail.com
>     > Date: Wed, 29 Apr 2015 07:59:21 -0500
>     > To: coco at maltedmedia.com
>     > Subject: Re: [Coco] MC6847 + Component video
>     >
>     > I’m not to fond of putting holes in the case either. I do like the idea
>     > of getting it all into one small connecter to minimize it.
>     > You mean something like this, right?
>     > <http://www.amazon.com/pin-mini-Component-YPbPr-Adapter/dp/B0042LHBJ6
>     > <http://www.amazon.com/pin-mini-Component-YPbPr-Adapter/dp/B0042LHBJ6>>
>     >
>     > - Ed
>     >
>     >
>     > > On Apr 29, 2015, at 7:36 AM, Joe Grubbs <jsgrubbs at hotmail.com> wrote:
>     > >
>     > > Replacing the RF box is one possibility, but I suppose creating a
>     > > daughter card that plugs into the 6847's socket would also work. The
>     > > latter would give the user the option of both composite and component.
>     > > Not sure about cable routing though. Maybe a CoCo3 style header
>     > > mounted underneath? Cutting the case isn't the best, but at least that
>     > > would be on the underside
>     > >
>     > >
>     > >
>     > >
>     > >> From: zippster278 at gmail.com
>     > >> Date: Tue, 28 Apr 2015 20:12:36 -0500
>     > >> To: coco at maltedmedia.com
>     > >> Subject: Re: [Coco] MC6847 + Component video
>     > >>
>     > >> You are thinking replacing the RF box like the composite boards?
>     > >>
>     > >> It could also be designed to plug into the 6847 socket. I think 2
>     > >> layouts could probably cover
>     > >> pretty much any CoCo1/2. Of course non-socketed motherboards would
>     > >> need a socket installed.
>     > >> Should be stackable with the External ROM board too. :)
>     > >>
>     > >> Not sure how to best position the output jacks/cables yet.
>     > >>
>     > >> - Ed
>     > >>
>     >
>     >
>     > --
>     > Coco mailing list
>     > Coco at maltedmedia.com
>     > https://pairlist5.pair.net/mailman/listinfo/coco
> 
> 
>     --
>     Coco mailing list
>     Coco at maltedmedia.com
>     https://pairlist5.pair.net/mailman/listinfo/coco
>