[Coco] FLEX 4 Coco3

[Bill Pierce]

Stephen, if I'm not mistaken, the cross-disassembler for Sleuth (OS9 or RSDOS) is built into the Sleuth program itself. It's a flag you set from Sleuth's command prompt, but the code on Gene's site may not actually contain the code for other CPUs as Gene was upgrading it to OS9 Level II (6809) and may have taken it out (Gene?). The sources for Sleuth (OS9) are also on Gene's site but would probably take a bit of massaging to assemble.

'b' flips the x-assembler switch and 'z' sets the CPU type.

I use Sleuth quite often as an OS9 disassembler (actually, I prefer it over the others), but I've never used it as a cross-disassembler.
To get the 'usage' message, just press '?'
The manual for the RSDOS version of 'Super Sleuth' in the maltedmedia archives. The OS9 version is identical so all commands are valid.
 

Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com


 
 
-----Original Message-----
From: Stephen H. Fischer <SFischer1 at Mindspring.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Sat, Apr 11, 2015 7:02 pm
Subject: Re: [Coco] FLEX 4 Coco3


Hi, 

Sorry, today when I started my computer there was one of Gene's web pages
open. 

Apparently my brain turned off before I sent the second post replying to
you. 

Gene's webpage: 

http://geneslinuxbox.net:6309/gene 

Then find
"Genes-os9-stf". 

Sleuth for OS-9 is there but I cannot see the "SLEUTH 6502 to
6809 translator". EmuDisk aborts like it does on so many disks on SLEUTH on
Gene's page. 

I remember the translator and perhaps running it. I have a vague
memory of just changing a table for the dissembler. BUT that memory cannot be
trusted. 

As for which FLEX disk for the CoCo, that was documented by someone
on this list, but a long time ago. 

I cannot look at the disks until Midnight
perhaps. 

If you need to run FLEX then the quickest way would be using the SWTC
emulator, you are stuck perhaps in the 32 column window for the CoCo.


SHF
----- Original Message ----- 
From: "camillus blockx"
<camillus.b.58 at gmail.com>
To: "Donald Akins via Coco"
<coco at maltedmedia.com>
Sent: Friday, April 10, 2015 10:28 PM
Subject: [Coco]
FLEX 4 Coco3


> Hi all,
> 
> Does anyone have a running FLEX setup?
> 
> Or can
someone help me to setup a minimal system, so I can run SLEUTH 6502 to 6809
translator?
> 
> My cc3 is in ICU on my bench, so I was looking for something
that can run in VCC and virtual disks (dsk).
> 
> Anyone feels called...lol?
>

> camillus ( ps. It is not urgent, yesterday would be perfect...)
> 
> 
> -- 
>
Coco mailing list
> Coco at maltedmedia.com
>
https://pairlist5.pair.net/mailman/listinfo/coco
>

-- 
Coco mailing
list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco