[Coco] 8k/16k bankable EPROM cartrdige board
Chad H
chadbh74 at hotmail.com
Sun Sep 7 20:47:14 EDT 2014
How about I do a quick design and see what the price will be...
-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Kandur
Sent: Sunday, September 07, 2014 7:38 PM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] 8k/16k bankable EPROM cartrdige board
These have pins, fitting into proto boards.
I need what is on the bottom part of the ribbon cable.
http://tinyurl.com/l3by7bk
Kandur
Sunday, September 7, 2014, 2:49:55 PM, you wrote:
> Haha. I saw a part number in his parts manifest that should be
> exactly what your looking for... The card edge to insert in the end if
your cable..
> He uses this for the cable ...
> http://www.digikey.com/product-search/en?KeyWords=c4pxg-4006m&WT.z_hea
> der=se
> arch_go
> And this for the slots each pack go into ...
> http://www.digikey.com/product-search/en?KeyWords=c4pxg-4006m&WT.z_hea
> der=se
> arch_go
> The other double-edged blade connector should be the final piece, or I
> could make one the same way I do the other boards..it would be very
> small and cheap to duplicate.
> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Kandur
> Sent: Sunday, September 07, 2014 4:38 PM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] 8k/16k bankable EPROM cartrdige board
> I saw this Cadillac before, all I need is a VW. :)
> Kandur
> Sunday, September 7, 2014, 2:37:38 PM, you wrote:
>> In lieu of obtaining a actual MPI, building one of these would be
>> best I think, IMO..
>> https://sites.google.com/site/tgmaxx/tandy-color-computer/expansion-i
>> n
>> terfac
>> e
>> -----Original Message-----
>> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Chad H
>> Sent: Sunday, September 07, 2014 4:23 PM
>> To: 'CoCoList for Color Computer Enthusiasts'
>> Subject: Re: [Coco] 8k/16k bankable EPROM cartrdige board
>> I think that is just for visual keying. I could always move it flush
>> so it's the same as the others on the edge. Bill raises a good point
> though.
>> I don't have any Y-Cables to test the thing. I've heard others have
>> made Y-Cables before with mixed results. Not sure if something
>> specific has to be done with the board or not.
>> -----Original Message-----
>> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Kandur
>> Sent: Sunday, September 07, 2014 4:02 PM
>> To: CoCoList for Color Computer Enthusiasts
>> Subject: Re: [Coco] 8k/16k bankable EPROM cartrdige board
>> Being such a short board, it could be used without a cartridge.
>> To show how serious I am about this mod, opened my beloved Coco-3 and
>> snapped a few photos, with Kip's EPROM board in the expansion slot.
>> to check how would it fit.
>> http://qdv.pw/coco/?p=299
>> Kandur
>> Sunday, September 7, 2014, 10:50:20 AM, you wrote:
>>> So far, I've been ordering them in sets of 3 from OSHPark. That's
>>> the minimum order. I am charged per square inch. If the PCB
>>> doesn't need to
>> be
>>> lengthened, the price won't change. I could theoretically delete
>>> the open notch at the top of the PCB and replace with the card
connector.
>>> This should work well if the PCB won't be in a cartridge housing.
>>> Not sure how it would effect things if it's mounted in a cartridge.
>>> I usually order another set once my last one has been sold. Turn
>>> around time is 2-3 weeks. I can design and order a sample set and
>>> see how it
>> turns
>>> out.
>>> -----Original Message-----
>>> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Kandur
>>> Sent: Sunday, September 07, 2014 12:29 PM
>>> To: CoCoList for Color Computer Enthusiasts
>>> Subject: Re: [Coco] 8k/16k bankable EPROM cartrdige board
>>> Sounds perfect.
>>> How would that effect the price and
>>> when will you order the next run?
>>> Kandur
>>> Sunday, September 7, 2014, 6:45:28 AM, you wrote:
>>>> Or I could do a special version of the EPROM board with the
>>>> straight-thru male header. Its really very simple change in the
>>>> board
>>> layout editor then the PCB house does it.
>>>> Sent from my ASUS Infinity
>>>> On Sep 6, 2014 10:28 PM, Kandur <k at qdv.pw> wrote:
>>>> Something like this for $6.95 + shipping
>>>> http://www.electronicplus.com/prodSearch.asp?prod_search=PC-501&Sub
>>>> m
>>>> i
>>>> t
>>>> =Search
>>>> 5 pins have to be cut off from this.
>>>> http://www.electronicplus.com/images/products/PC-501.jpg
>>>> Kandur
>>>> Saturday, September 6, 2014, 8:00:56 PM, you wrote:
>>>>> Your Y cable to card edge instead of 40 pin socket header
>>>>> On Sep 6, 2014 9:17 PM, Kandur <k at qdv.pw> wrote:
>>>>> This one seem to be simpler,
>>>>> all connections straight thorough on both side of the board.
>>>>> http://qdv.pw//eng/_photos/Computers/adapter.jpg
>>>>> Kandur
>>>>> Saturday, September 6, 2014, 6:24:40 PM, you wrote:
>>>>>> I'm sure I could...just would have to make sure of the pinouts
>>>>>> first
>>>>>> On Sep 6, 2014 7:38 PM, Kandur <k at qdv.pw> wrote:
>>>>>> After 3 tries and url edits, success. Very nice board.
>>>>>> If you had a 40 pin male IDC header on this board for an easy
>>>>>> Y-cable connection, I would order one for sure.
>>>>>> Could you make an adapter board with one end having a Coco
>>>>>> cartridge slot edge connector, the other end having a 40 pin male
>>>>>> IDC header for a Y-cable?
>>>>>> Kandur
>>>>>> Saturday, September 6, 2014, 4:57:33 PM, you wrote:
>>>>>>> Make sure you copy the whole link with numbers. Emails to this
>>>>>>> forum often chop the links for some reason
>>>>>>> On Sep 6, 2014 6:30 PM, Kandur <k at qdv.pw> wrote:
>>>>>>> "This listing
>>>>>>> (Tandy-TRS-80-CoCo-Color-Computer-EPROM-Pak-Cartridge) has been
>>> removed, or this item is not available.
>>>>>>> Please check that you've entered the correct item number
>>>>>>> Listings that have ended 90 or more days ago will not be
>>>>>>> available for
> viewing.
>>> "
>>>>>>> Kandur
>>>>>>> Saturday, September 6, 2014, 2:09:37 PM, you wrote:
>>>>>>>> I have another batch of these in if anyone is interested.
>>>>>>>> http://www.ebay.com/itm/Tandy-TRS-80-CoCo-Color-Computer-EPROM-
>>>>>>>> P
>>>>>>>> ak
>>>>>>>> -Cartridge
>>>>>>>> -/321514156488?
>>>>>>> --
>>>>>>> Coco mailing list
>>>>>>> Coco at maltedmedia.com
>>>>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>>>> --
>>>>>> Coco mailing list
>>>>>> Coco at maltedmedia.com
>>>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>>> --
>>>>> Coco mailing list
>>>>> Coco at maltedmedia.com
>>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list