[Coco] A new idea for a CoCoSDC expander

Kandur k at qdv.pw
Wed Oct 15 12:44:01 EDT 2014


Been looking at his for weeks, while making a Y-cable.
This gave me the idea of using a double ended male edge connector.
If there was a pc board available, I would have bought one.
Weird? Not at all, rather clever. This way you could place
the unit behind or with feet for air flow, on the top of the Coco.

Kandur

Wednesday, October 15, 2014, 1:57:06 AM, you wrote:
> Video of Tom Gunnison's device:

> Custom Multi-Pak Interface for the Tandy Radio Sh…:
> http://youtu.be/zy8WdMEAF5Y

> His documentation:

> http://www.tandycoco.com/techdocs/ColorComputerExpansionInterface.pdf

> It does connect to a CoCo via cable with a card edge connector to a 40 pin
> socket. Kinda wierd but it works.

> Brian
> On Oct 14, 2014 11:41 PM, "Bill Pierce via Coco" <coco at maltedmedia.com>
> wrote:

>> Ed, as far as I know, no one has ever built and tested?John's 8 slot
>> expansion, or his 4-slot RS "clone" for that matter. I don't think John
>> ever built one himself. He just did the design. He disappeared right after
>> he made those posts to coco3.com. He also had Orch90, RS232, and FDC
>> clones as well.
>> Tom Gunnison has a 4 slot design that he HAS built but it's a little bulky
>> compared to John's design.
>> I also like John's idea of a "controller" that plugs into the Coco, cabled
>> to a "main module" with the slots.
>> ?
>> ?
>> As for MPI "clones"... look through the old Rainbows, Color Computer
>> Magazines, and Hot?Cocos, and you'll find 10-15 (if not more) different
>> models that have been put out through the years.? Eveything from a simple
>> "buffered slot expander" to a full blown unit with 1 meg of memory,
>> built-in floppy and HD controller, 2-4 RS232 ports, P-Printer port etc.
>> There have been many; from homebrews to "nicer" than Radio Shack's model.


>> Bill Pierce
>> "Today is a good day... I woke up" - Ritchie Havens
>> ?

>> My Music from the Tandy/Radio Shack Color Computer 2 & 3
>> https://sites.google.com/site/dabarnstudio/
>> Co-Webmaster of The TRS-80 Color Computer Archive
>> http://www.colorcomputerarchive.com/
>> Co-Contributor, Co-Editor for CocoPedia
>> http://www.cocopedia.com/wiki/index.php/Main_Page
>> E-Mail: ooogalapasooo at aol.com




>> -----Original Message-----
>> From: Zippster <zippster278 at gmail.com>
>> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
>> Sent: Tue, Oct 14, 2014 11:22 pm
>> Subject: Re: [Coco] A new idea for a CoCoSDC expander




>> I read about half way through the info on this one so far.

>> Was this one ever completed/produced?

>> I like the 2 board concept.

>> - Ed




>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco


More information about the Coco mailing list