[Coco] CocoSDC
Zippster
zippster278 at gmail.com
Sat Oct 11 12:51:58 EDT 2014
Sorry Louis, forgot about the module. I can include one of these with the
board & chips option for $1.25 as I bought 100 of these.
- Ed
On Oct 11, 2014, at 11:35 AM, Darren A <mechacoco at gmail.com> wrote:
> On Sat, Oct 11, 2014 at 7:33 AM, Zippster <zippster278 at gmail.com> wrote:
>
>> Yes. Here it is with Mouser part numbers.
>>
>> - Ed
>>
>>
>> On Oct 11, 2014, at 8:19 AM, Louis Ciotti <lciotti1 at gmail.com> wrote:
>>
>>> For those of us not getting a full kit, will you provide BOM for the
>>> remaining items we have to get on our own?
>>>
>>
>>
> In addition to the parts listed in that file, you also need one of these
> widely available SD Card modules:
>
> <http://ebayitem.com/271434917676>
>
> When assembling the board, I recommend you place a piece of foam tape
> between the SD card socket and the board. This is to lift the module
> slightly so that the header pins don't protrude too far past the bottom of
> the board which can otherwise cause it to not rest properly inside an
> FD-502 case.
>
> Darren
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list