[Coco] video composite on korean coco 26-3134A
Zippster
zippster278 at gmail.com
Sat Oct 4 09:50:16 EDT 2014
The crystal on the motherboard should tell you wether it’s PAL or NTSC.
It’s divided by 4 for the subcarrier frequency.
14.31818mhz = NTSC, PAL should be 17.73448mhz
- Ed
On Oct 4, 2014, at 8:05 AM, Bruce W. Calkins <brucewcalkins at charter.net> wrote:
> If it is a 50 Hz power supply the TV output is probably useing the European PAL standard.
>
> Bruce W.
>
> ==================
>
>
>
> ----- Original Message -----
> From: "didier derny"
>
> I tried, I was not expecting a correct image, but at least something like a
> synchro
> But nothing, just snow...
>
> The tv see a "VCR" but no signal
>
> Any idea if the modulator or the coco uses the 60hz ?
> The power supply is 110v but 50Hz
>
> That's why I have a serious doubt about this machine...
>
> --
> didier
>
> -----Message d'origine-----
> De : Coco [mailto:coco-bounces at maltedmedia.com] De la part de Zippster
> Envoyé : samedi 4 octobre 2014 00:17
> À : CoCoList for Color Computer Enthusiasts
> Objet : Re: [Coco] video composite on korean coco 26-3134A
>
> You could rig up a quick and dirty piece of coax cable from the RF port to
> the antenna in jack on a tv and tune it to channel 3 or 4 (whatever the
> switch is on). The picture may not even be that bad.
>
> Or the relay.
>
>
> -Ed
>
>
> ---
> This email is free from viruses and malware because avast! Antivirus protection is active.
> http://www.avast.com
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list