[Coco] video composite on korean coco 26-3134A

[Bruce W. Calkins]

If it is a 50 Hz power supply the TV output is probably useing the European 
PAL standard.

Bruce W.

==================



----- Original Message ----- 

From: "didier derny"

I tried, I was not expecting a correct image, but at least something like a
synchro
But nothing, just snow...

The tv see a "VCR" but no signal

Any idea if the modulator or the coco uses the 60hz ?
The power supply is 110v but 50Hz

That's why I have a serious doubt about this machine...

--
didier

-----Message d'origine-----
De : Coco [mailto:coco-bounces at maltedmedia.com] De la part de Zippster
Envoyé : samedi 4 octobre 2014 00:17
À : CoCoList for Color Computer Enthusiasts
Objet : Re: [Coco] video composite on korean coco 26-3134A

You could rig up a quick and dirty piece of coax cable from the RF port to
the antenna in jack on a tv and tune it to channel 3 or 4 (whatever the
switch is on).  The picture may not even be that bad.

Or the relay.


-Ed


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com