[Coco] Coco3 and KVM switch

[Mark Marlette]

Kandur,
No holes are made in the case. A slight vnotch can be cut into the top half of the coco that isn't seen even when the cable is removed. Exit is in the rear right corner is where I put them. Could also probably go out the cart slot.

Just takes pressure off the cable and the cases.
The PCB mounts into the vent holes under the keyboard.
 Mark Marlette
http://www.cloud9tech.com
mark at cloud9tech.com

      From: Kandur <k at qdv.pw>
 To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com> 
 Sent: Sunday, November 23, 2014 2:36 PM
 Subject: Re: [Coco] Coco3 and KVM switch
   
Thanks Robert, can't find at Cloud9,
what kind of socket is provided on their
adapter to plug the PS/2 Keyboard in.
Would I have to drill a hole in the case
for the PS/2 Keyboard's cable?
http://preview.tinyurl.com/qxdbosx
 
Kandur



Sunday, November 23, 2014, 10:40:28 AM, you wrote:
> Well I'm guessing there is no easy with that.  Using a ps2 keyboard, I 
> have used KVM between PC and cloud9's ps2 adapter.

> -RobertH

> On 11/23/2014 11:23 AM, Kandur wrote:
>> Additional info, the keyboard is USB.

>> Kandur

>> Sunday, November 23, 2014, 8:21:25 AM, you wrote:
>>> Hi,
>>> what is the easiest way to share a PC's keyboard with a Coco3 ?
>>> The video switching works fine already.

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco