[Coco] Another SDC Case Attempt

[Zippster]

That looks really nice Tim.

You should do a run of those.  :) 

I’d certainly buy a couple. 

- Ed


> On Nov 6, 2014, at 10:01 PM, tim lindner <tlindner at macmess.org> wrote:
> 
> First off, thanks to Darren (for creating) and Zippster (for the second
> run) for making the SDC avaiable again.
> 
> Now here is another attempt at an SDC Case. I've fixed the size to
> perfectly match the SDC board. And I decided to etch the SDC type (and
> arrow) into the top plate.
> 
> http://www.macmess.org/images/170_0989-x.jpg
> http://www.macmess.org/images/170_0987-x.jpg
> http://www.macmess.org/images/170_0985-x.jpg
> 
> If you want to make your own:
> 
> http://www.macmess.org/downloads/CoCo-SDC-CADs.zip
> 
> I've given up on the walled Sintra case. The material is way too soft. A
> screwdriver can dent it. I was hoping a few coats of varnish would
> provide a nice hard shell, but it didn't.
> 
> -- 
> tim lindner
> tlindner at macmess.org                                              Bright
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco