[Coco] A year in review at Cloud-9

[CoCoList for Color Computer Enthusiasts]

Forgot to answer the Becker port question....

Probably not, as from what I recall. The Becker port was in the $FF41 / $FF42 region. 

As that works for the CoCoFPGA or in Emulators, etc...On real hardware that is in the floppy area.

Now if I have this wrong, please correct me as I haven't looked it up.


 
Mark Marlette
http://www.cloud9tech.com
mark at cloud9tech.com


________________________________
 From: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com> 
Sent: Wednesday, May 7, 2014 10:45 AM
Subject: Re: [Coco] A year in review at Cloud-9
 

On Wed, May 7, 2014 at 9:08 AM, CoCoList for Color Computer Enthusiasts <
coco at maltedmedia.com> wrote:

> miniFLASH
>  - Four 16K FLASH selectable boot/ROMs hardware or software selectable.
> Boards ready to go to the board house. Will do a prototype run before a
> production run. This is the same design as resides on the SuperIDE,
> different form factor, i na mini ROM pak case.
>

I can't wait to see pricing and photo of the unit.


>
> SuperSD - Working on the CPLD logic to have an SD interface with a
> RTC(DS1307), USB COM port(parallel FIFOs) so no serial baud rate limit,
> will run at
>

Now here you have the USB COM port(parallel FIFOs).  Will this be addressed
into the becker/boisy interface addresses to allow people to use the becker
NitrOS-9 and HDBDOS to work with this unit?


>
> Happy CoCoing!!!!!!
>
>
> Regards,
>
> Mark
> http://www.cloud9tech.com
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco

>

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco