[Coco] Coco monitors 1084s-xx ?

[Bill Loguidice]

It's the "Commodore 1084S Monitor Cable DB-9 Mating Cable" on the Cloud-9
site. Just make sure your 1084S has the square connector (some don't, as
there were several models of the 1084). For mine, the Cloud-9 cable
terminated in a female connection, which is the same as on the back of my
1084S, so I needed to change the gender to male so it could plug into my
1084S. Here are the photos of the connections and the gender changer:

https://flic.kr/p/myW2bT

https://flic.kr/p/myWvFM

===================================================
Bill Loguidice, Managing Director; Armchair Arcade,
Inc.<http://www.armchairarcade.com>
===================================================
Authored Books<http://www.amazon.com/Bill-Loguidice/e/B001U7W3YS/ref=ntt_dp_epwbk_1>and
Film <http://www.armchairarcade.com/film>; About me and other ways to get
in touch <http://about.me/billloguidice>
===================================================


On Sat, Mar 29, 2014 at 4:10 PM, Kip Koon <computerdoc at sc.rr.com> wrote:

> Hi Bill!
> I'll have to look at my 1084S-P again because I also remember a button that
> switches between Composite video and RGB myself.  I just have never taken
> advantage of the RGB input.  I had actually forgotten about that fact
>  until
> I read your email just now.  How do I figure out which one of the monitor
> cables I will need from Cloud9tech?  He lists several, but if I remember
> correctly, I could not tell which ones to order to connect my Coco 3 up to
> my various monitors.  Take care my friends.
> Kip
>
> -----Original Message-----
> From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com]
> On
> Behalf Of Bill Loguidice
> Sent: Saturday, March 29, 2014 10:00 AM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Coco monitors 1084s-xx ?
>
> I'm using a 1084S-D1 with a cable from Cloud-9 (I did have to buy a simple
> gender changer separately for the end of the cable, though). It works
> perfectly with my CoCo 3, plus I can simultaneously plug into the
> 1084S-D1's
> composite connection for legacy software and just switch back and forth
> between that and the RGB with the button on the monitor.
>
> -Bill
>
> ===================================================
> Bill Loguidice, Managing Director; Armchair Arcade,
> Inc.<http://www.armchairarcade.com>
> ===================================================
> Authored
> Books<http://www.amazon.com/Bill-Loguidice/e/B001U7W3YS/ref=ntt_dp_epwbk_1
> >a
> nd
> Film <http://www.armchairarcade.com/film>; About me and other ways to get
> in
> touch <http://about.me/billloguidice>
> ===================================================
>
>
> On Fri, Mar 28, 2014 at 10:14 PM, William Haywood <
> firstsecondary at verizon.net> wrote:
>
> >  Does any one know which 1084S-xx monitors will work with the coco3?
> > Without combining the Horz -Vert Sync?
> >
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>