[Coco] Glenside IDE Drivers NitrOS-9 Disk Image Needed

[Shane Broadbent]

Daniel Campos <daniel.campus at ...> writes:

> 
> Have set the jumper on the Glenside to position "50" ? The default is "70".
> 
> Daniel
> 
> 2014-03-12 8:55 GMT-03:00 Shane Broadbent <shanetb at ...>:
> 
> >
> > Thanks for the replies Luis, The CF adapter is currently powered with
> > external 5v power supply. The Power & Card Detect LEDs light up.
> > I formated the SD card with gparted as you suggested.
> > I then performed the DD as you suggested and that went through OK.
> > But I still get the error message on booting HDB-DOS
> > 'LBA Hard Drive Not Found'
> >
> > This is getting a bit frustrating...
> >
> > Cheers,
> > Shane
> >

Thanks Daniel...yes i forgot to mention, I do have the Jumper set to 50.
Also the CF adapter jumper is set to 'Master'.

Cheers,
Shane