[Coco] Gene's script...

[Bob Devries]

Tormod,

I did as you suggested, and it turns out I had a pre-v2.0 Toolshed.

However, after pulling a new version (a clean new pull of the repo), I get a 
large number of warnings, and padrom isn't built at all.

I'm rebuilding as I write this, forcing output to a log file to see what's 
going on.

Regards, Bob Devries
Dalby, QLD, Australia

----- Original Message ----- 
From: "Tormod Volden" <lists.tormod at gmail.com>
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Sent: Wednesday, January 15, 2014 6:37 PM
Subject: Re: [Coco] Gene's script...


> On Wed, Jan 15, 2014 at 9:00 AM, Bob Devries wrote:
>> Hi Gene,
>>
>> If lwtools is part of the build as you suggest, I'd expect to see a
>> reference to it in the upper level makefile, but there's no mention that 
>> I
>> can see.
>>
>> @Tormod:
>> Can you comment on this?
>
> You are both mixing up the lwtools utilities and the obsolete
> lwtools-port branch of the nitros9 source code.
>
> Bob, please read through
> http://sourceforge.net/apps/mediawiki/nitros9/index.php?title=Building_NitrOS9
> and tell me if something there is not clear for you.
>
> IMHO, forget about Gene's build script. It is not that difficult to
> understand what to do and to perform the steps manually.
>
> You need lwtools 4.9 and toolshed 2.1 installed on your build machine.
> If you can run "os9" and "lwasm -V" on your command line, you are all
> set.
>
> Then you just need to pull the nitros9 code and run make:
>
> == From scratch ==
>
> hg clone http://hg.code.sf.net/p/nitros9/code nitros9
> cd nitros9
> make dsk
>
> == If you already had an old nitros9 repo checkout, do this once ==
>
> hg pull
> hg update default
> make dsk
>
> == Later, to update your builds ==
>
> hg pull
> hg update
> make dsk
>
> Only if you want to build from a subdirectory you will need to set 
> $NITROS9DIR.
>
> Best regards,
> Tormod
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco