[Coco] CoCo 2 Factory Composite Video RE'd

[Simon Jonassen]

Hey John !

NO AMP NEEDED !

Mine gets fed directly from the modulator input

/Simon :-)
 

-----Oprindelig meddelelse-----
Fra: Coco [mailto:coco-bounces at maltedmedia.com] På vegne af John W. Linville
Sendt: 16. december 2014 17:21
Til: CoCoList for Color Computer Enthusiasts
Emne: Re: [Coco] CoCo 2 Factory Composite Video RE'd

On Tue, Dec 16, 2014 at 10:17:40AM -0600, Zippster wrote:
> Ah,  so the conversion of the 6847 signals to a PAL compatible sync 
> and number of lines would be done on the motherboard before being sent 
> to the RF modulator.  Perhaps the modulation chip (1372 PAL 
> equivalent) is then still in the RF box similar to the NTSC CoCo2’s.

Well, as I was saying earlier I have been told that the PAL machines use a
design like the CoCo1 in which the RF modulator just takes a composite video
signal as input.  In that case, those machines should only need a wire or
maybe an amplifier to get composite video output.

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville at tuxdriver.com			might be all we have.  Be ready.

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco