[Coco] Does anyone have a Level3 disk that actually boots?

[Bill Nobel]

Oh, well Thx for the heads up, I never tried your boot below 2mb.  My VCC is defaulted to 2mb.

Bill Nobel

> On Dec 15, 2014, at 7:15 PM, Robert Gault <robert.gault at att.net> wrote:
> 
> Bill Nobel wrote:
>> Hi Bill, you can find a bootable disk for VCC & Emudsk VHD here:
>> 
>> https://github.com/bnobel/Nitros9-Level-3 <https://github.com/bnobel/Nitros9-Level-3>
>> 
>> It is Level3.os9 in the Robert Gault folder.  It is what I am dissecting to bring Level 3 to current V3.3.0 Nitros9. The image in Bob Devries folder does not boot as he has that setup for SCSI HD’s.  The documentation to setup a boot file is in Alan Dekok’s folder.  It is very tricky to setup.  The source in the main root is not fully compilable but getting there.
>> 
> 
> There is something funny about the disk I sent. Both VCC and MESS !must! be set for 2Megs or the system will crash after the welcome message. That does not bode well for real hardware systems where most of us have 512K max.
> 
> I'll need to try this disk on my real Coco3.
> 
> Robert
> 
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco