[Coco] DriveWire is just a hobby (Was: DW4 on MAc & Linux)

[Bill Pierce]

Al,
 Tormod Volden posted a link during the first half or the "documentation discussion" of a zip of a fresh build of all the HDBDOS stuff.
The link is
http://toolshed.sourceforge.net/snapshots/

Copy it and save it somewhere as it's top secret and only exists in this email and in the list history :-)
It needs to be linked from the Toolshed site as well as the DW4 Wiki.

There have been mods and bug fixes since the files on Cloud9 were posted. These are the most current. The Cloud9 list is also incomplete and a little dated.

Bill Pierce
My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Webmaster of The TRS-80 Color Computer Archive
http://www.colorcomputerarchive.com/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com




-----Original Message-----
From: Al Hartman <alhartman6 at optonline.net>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Thu, Sep 26, 2013 10:29 pm
Subject: Re: [Coco] DriveWire is just a hobby (Was: DW4 on MAc & Linux)


Those files don't look like the files in the DRIVEWIRE.ZIP file on the 
Cloud9 website.

I don't even know where to get this file.

-[ Al ]-

-----Original Message----- 
From: Bill Pierce
Sent: Thursday, September 26, 2013 10:21 PM
To: coco at maltedmedia.com
Subject: Re: [Coco] DriveWire is just a hobby (Was: DW4 on MAc & Linux)


Al, first, Drivepak is NOT a Cloud 9 product and I don't think it's 
supported by HDBDOS. DrivePak is a product of Roger Taylor and good luck 
with that.

Here's a run-down of the files in the Zip Tormod uploaded the other day, 
though there are some files in there someone else will have to fill in as 
I'm not familiar with the hardware.


hdbchs.bin - not sure of this one
hdb4n1.bin - Loadable DECB file for hdbdos and Dito's 4n1 controller

hdbdhdii.bin - Not sure
hdbdw3arduino.bin - Loadble file for hdbdos for the Arduino Coco emulator 
and DW3

hdbdw3bc3.bin - DECB loadable file for hdbdos, emulators with the Becker 
Port and dw3

hdbdw3bck.bin - DECB loadable file for hdbdos, emulators with the Becker 
Port and dw3 running at 1mhz for Coco 2 game compatability
hdbdw3cc1.bin - DECB loadable file for hdbdos, Coco 1 and dw3

hdbdw3cc2.bin - DECB loadable file for hdbdos, Coco 2 and dw3
hdbdw3cc3.bin - DECB loadable file for hdbdos, Coco 3 and dw3





hdbdw3jc2.bin - Not sure

hdbdw3jc3.bin - Not sure
hdbdw4cc2.bin - DECB loadable file for hdbdos, Coco 2 and dw4 using Turbo 
mode (double baud rate)



hdbdw4cc3.bin - DECB loadable file for hdbdos, Coco 3 and dw4 using Turbo 
mode (double baud rate)







hdbkenton.bin - Loadable DECB file for hdbdos and Kenton SCSI HD system
hdblba. bin - Not sure
hdbltech.bin - Not sure
hdbtc3.bin - Loadable DECB file for hdbdos and Cloud9 TC^3 controller


hdbdw3bc3.cas - DECB cassete emulator (not wav) file for hdbdos, emulators 
with the Becker Port and dw3

hdbdw3bck.cas - DECB cassette emulator (not wav) file for hdbdos, emulators 
with the Becker Port and dw3 running at 1mhz for Coco 2 game compatability


hdbchs.rom - not sure of this one

hdbdhdii.rom - Not sure
hdbdw3arduino.rom - Rom image for hdbdos for the Arduino Coco emulator and 
DW3

hdbdw3bc3.Rom - Rom image for hdbdos, emulators with the Becker Port and dw3

hdbdw3bck.bin - Rom image for hdbdos, emulators with the Becker Port and dw3 
running at 1mhz for Coco 2 game compatability
hdbdw3cc1.rom - Rom image for hdbdos, Coco 1 and dw3
hdbdw3cc2.rom - Rom image for hdbdos, Coco 2 and dw3
hdbdw3cc3.rom - Rom image for hdbdos, Coco 3 and dw3

hdbdw3jc2.rom - Not sure

hdbdw3jc3.rom - Not sure

hdbdw4cc2.rom - Rom image for hdbdos, Coco 2 and dw4 using Turbo mode 
(double baud rate)


hdbdw4cc3.rom - Rom image for hdbdos, Coco 3 and dw4 using Turbo mode 
(double baud rate)

hdbkenton.rom - Rom image for hdbdos and Kenton SCSI HD system
hdblba. rom - Not sure
hdbltech.rom - Not sure
hdbtc3.rom - Rom image for hdbdos and Cloud9 TC^3 controller









hdbchs.wav - not sure of this one

hdbdhdii.wav - Not sure
hdbdw3arduino.wav - Wav recording for cassette loads for hdbdos for the 
Arduino Coco emulator and DW3

hdbdw3bc3.wav - Wav recording for cassette loads for hdbdos, emulators with 
the Becker Port and dw3

hdbdw3bck.wav - Wav recording for cassette loads for hdbdos, emulators with 
the Becker Port and dw3 running at 1mhz for Coco 2 game compatability
hdbdw3cc1.wav - Wav recording for cassette loads for hdbdos, Coco 1 and dw3
hdbdw3cc2.wav - Wav recording for cassette loads for hdbdos, Coco 2 and dw3
hdbdw3cc3.wav - Wav recording for cassette loads for hdbdos, Coco 3 and dw3

hdbdw3jc2.wav- Not sure

hdbdw3jc3.wav - Not sure

hdbdw4cc2.wav - Wav recording for cassette loads for hdbdos, Coco 2 and dw4 
using Turbo mode (double baud rate)


hdbdw4cc3.wav - Wav recording for cassette loads for hdbdos, Coco 3 and dw4 
using Turbo mode (double baud rate)

hdbkenton.wav - Wav recording for cassette loads for hdbdos and Kenton SCSI 
HD system
hdblba. wav - Not sure
hdbltech.wav - Not sure
hdbtc3.wav - Wav recording for cassette loads for hdbdos and Cloud9 TC^3 
controller








I think that's all of them. Someone can fill in the ones I'm not familiar 
with.
NOTE: I will not be responsible for typos, mistakes, or Cocos blowing up 
with the use of this info :-P






Bill Pierce
My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Webmaster of The TRS-80 Color Computer Archive
http://www.colorcomputerarchive.com/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com




-----Original Message-----
From: Al Hartman <alhartman6 at optonline.net>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Thu, Sep 26, 2013 8:52 pm
Subject: Re: [Coco] DriveWire is just a hobby (Was: DW4 on MAc & Linux)


BTW... Could you tell me which files in the ZIP re the ROM files I need to
burn for a Coco 3 and Coco 2 Disk Controller? Are there different ones for a
Drivepak?

-[ Al ]-

-----Original Message----- 
From: Bill Pierce
Sent: Thursday, September 26, 2013 6:57 PM
To: coco at maltedmedia.com
Subject: Re: [Coco] DriveWire is just a hobby (Was: DW4 on MAc & Linux)


Al, the rom files have no load address. They are just direct dumps. They are
not meant to be loaded into the Coco. Only by the burner software.

Bill Pierce
My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Webmaster of The TRS-80 Color Computer Archive
http://www.colorcomputerarchive.com/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com




-----Original Message-----
From: Al Hartman <alhartman6 at optonline.net>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Thu, Sep 26, 2013 6:45 pm
Subject: Re: [Coco] DriveWire is just a hobby (Was: DW4 on MAc & Linux)


DOH!!!!!

Thanks Art!

Do you know of a program that can look at a binary file and tell what
address it is meant to load to?

Because I don't know where the ROM files in the Drivewire image are going to
load to.

-[ Al ]-

-----Original Message----- 
From: Arthur Flexser
Sent: Thursday, September 26, 2013 4:24 PM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] DriveWire is just a hobby (Was: DW4 on MAc & Linux)

Al, a trick I use to avoid having to calculate offsets is this:

Say you want to move a file XYZ.BIN that would normally load at $7E00
so that it loads at $2000 instead.  Just issue this command:

LOADM"XYZ",&H2000-&H7E00

Let the computer worry about the offset calculation!

Art

On Thu, Sep 26, 2013 at 4:02 PM, Al Hartman <alhartman6 at optonline.net>
wrote:

> I need to burn an HDB-DOS ROM for my J&M Controller. I just need to know
> which file to use, and how to get it to the correct memory area so I can
> burn it to an EPROM on my Coco. I'd like to burn one for the Coco 2, and
> another for the Coco 3.
>
> All the Coco DECB manuals are cryptic on using the offset parameter of the
> LOADM command, and I have to figure out where the ROM file is set to load
> to, so I can calculate the offset and save it to tape for burning. I have
> an
> EPROM eraser coming in case I screw up. My old one has disappeared.
>
> ADOS made it seem so easy... LOL!
>

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco



--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco



--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco 


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco