[Coco] OS-9 80-column driver is ready

Tue Sep 24 16:24:03 EDT 2013

Luis,

Per section 6 of the sIDE manual.

sIDE default is $ff50-59. 

If your SuperIDE Interface has the real-time
clock option, those registers will always be located at addresses $FF78-$FF79
and $FF7C.   

Regards,

Mark

________________________________
 From: Luis Antoniosi (CoCoDemus) <retrocanada76 at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com> 
Sent: Tuesday, September 24, 2013 3:05 PM
Subject: Re: [Coco] OS-9 80-column driver is ready

Which address the SuperIDE RTC uses.

On Tue, Sep 24, 2013 at 3:56 PM, Mark Marlette <mmarlette at frontiernet.net>wrote:

> Mark- Not following what I can tell more about..... ???????
>
>
>
>
> ________________________________
>  From: Luis Antoniosi (CoCoDemus) <retrocanada76 at gmail.com>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Sent: Tuesday, September 24, 2013 2:49 PM
> Subject: Re: [Coco] OS-9 80-column driver is ready
>
>
> It's not included the superIDE and its RTC. Mark can tell more about it
> right ?
>
> Every spot is populated. The ideal would be to have jumpers on it. And
> config the address in the descriptor.
>
>
> On Tue, Sep 24, 2013 at 3:36 PM, Bill Pierce <ooogalapasooo at aol.com>
> wrote:
>
> >
> > Luis,
> > Here's a doc I got from somewhere with various port addresses of various
> > devices. I added some to it as well.
> >
> > Everyone check it and see if it's correct or if anything needs to be
> added
> > for other unlisted devices
> >
> > I will then update the doc.
> > It's in MW Word 2008 which should be readable with Open Office in Linux
> as
> > well as others
> >
> >
> >
> https://dl.dropboxusercontent.com/u/23059963/Stuff/Coco%20Registered%20Port%20Addresses%20and%20Devices.doc
> >
> > Bill Pierce
> > My Music from the Tandy/Radio Shack Color Computer 2 & 3
> > https://sites.google.com/site/dabarnstudio/
> > Co-Webmaster of The TRS-80 Color Computer Archive
> > http://www.colorcomputerarchive.com/
> > Co-Contributor, Co-Editor for CocoPedia
> > http://www.cocopedia.com/wiki/index.php/Main_Page
> > E-Mail: ooogalapasooo at aol.com
> >
> >
> >
> >
> > -----Original Message-----
> > From: Luis Antoniosi (CoCoDemus) <retrocanada76 at gmail.com>
> > To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> > Sent: Tue, Sep 24, 2013 2:51 pm
> > Subject: Re: [Coco] OS-9 80-column driver is ready
> >
> >
> > The card uses FF78 FF79, this conflicts with the Glenside IDE and the RTC
> > right ?
> >
> > Would be better to change it, but what address would be safe to use to
> not
> > conflict with SuperIDE, RTC, Glenside and GIME ?
> >
> > Something around FF6x ?
> >
> >
> > On Tue, Sep 24, 2013 at 12:01 PM, Louis Ciotti <lciotti1 at gmail.com>
> wrote:
> >
> > > I would be willing to help out with the board assuming you can provide
> a
> > > schematic.
> > >
> > >
> > >
> > > Sent from my iPhone
> > >
> > > > On Sep 24, 2013, at 11:51 AM, "Luis Antoniosi (CoCoDemus)" <
> > > retrocanada76 at gmail.com> wrote:
> > > >
> > > > Well I call it protype because in fact it was a prototype made in
> 1985
> > by
> > > > some company called PHB in Texas. Is what is written in the label :P
> > > >
> > > > I'm doing the schematics and I will try to make it in protoboard, but
> > it
> > > > will take a while since I'm a software guy not a hardware.
> > > >
> > > > But yes the circuit is so simple that it can be easily copied. I
> think
> > > the
> > > > most difficult part is to find the CRT9128.
> > > >
> > > > I found in china the CRT9128-000P.  I hope is the same ? If the
> > > protoboard
> > > > works I can see the possibility to make a batch of it.
> > > >
> > > >
> > > > On Tue, Sep 24, 2013 at 11:41 AM, Al Hartman <
> alhartman6 at optonline.net
> > > >wrote:
> > > >
> > > >> Pretty neat!
> > > >>
> > > >> Are you planning to make these for sale?
> > > >>
> > > >> Also saw the CP/M emulator video, which was pretty neat. I remember
> > back
> > > >> in the day there was a box that attached to the Coco that was
> supposed
> > > to
> > > >> provide a Z-80 CPU and 64k of RAM to run CP/M.
> > > >>
> > > >> -[ Al ]-
> > > >>
> > > >> -----Original Message----- From: Luis Antoniosi (CoCoDemus)
> > > >> Sent: Tuesday, September 24, 2013 10:44 AM
> > > >> To: CoCoList for Color Computer Enthusiasts
> > > >> Subject: [Coco] OS-9 80-column driver is ready
> > > >>
> > > >> Watch the video:
> > > >>
> > > >> http://www.youtube.com/watch?**v=PTeg_6JqZHA<
> > > http://www.youtube.com/watch?v=PTeg_6JqZHA>
> > > >>
> > > >> I'm very happy with the results. Using OS9L1 now is a pleasure for
> me
> > :)
> > > >>
> > > >> Something occured to me, since I'm not using the VDG I can switch
> the
> > > CPU
> > > >> to 2Mhz right ?
> > > >>
> > > >> --
> > > >> Long live the CoCo
> > > >>
> > > >> --
> > > >> Coco mailing list
> > > >> Coco at maltedmedia.com
> > > >> http://five.pairlist.net/**mailman/listinfo/coco<
> > > http://five.pairlist.net/mailman/listinfo/coco>
> > > >>
> > > >> --
> > > >> Coco mailing list
> > > >> Coco at maltedmedia.com
> > > >> http://five.pairlist.net/**mailman/listinfo/coco<
> > > http://five.pairlist.net/mailman/listinfo/coco>
> > > >
> > > >
> > > >
> > > > --
> > > > Long live the CoCo
> > > >
> > > > --
> > > > Coco mailing list
> > > > Coco at maltedmedia.com
> > > > http://five.pairlist.net/mailman/listinfo/coco
> > >
> > > --
> > > Coco mailing list
> > > Coco at maltedmedia.com
> > > http://five.pairlist.net/mailman/listinfo/coco
> > >
> >
> >
> >
> > --
> > Long live the CoCo
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
> >
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
>
>
>
> --
> Long live the CoCo
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>

-- 
Long live the CoCo

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco