[Coco] [COCO} VCC 1.43beta release

[Luis Antoniosi (CoCoDemus)]

Where do i get this new vcc ? google only knows the 1.42.


On Thu, Apr 18, 2013 at 6:04 PM, Bill Pierce <ooogalapasooo at aol.com> wrote:

>
> David, now that this is finally out, I can post some of my preset VHD
> boots for Becker, HDBDOS and DW. I have preset VHDs I use as templets for
> creating a new Becker boot when I need them. These boots give access to 4
> DW drives, 4 floppies and the Vcc Vhd. The boots are equipped with CoWin &
> CoVdg as well as all the DW drivers, EmuDsk drivers and Gene Heskett's "My
> Ram" ramdisk which is THE BEST ramdisk ever. It "Just Works".
>
> Bill Pierce
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Webmaster of The TRS-80 Color Computer Archive
> http://www.colorcomputerarchive.com/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> E-Mail: ooogalapasooo at aol.com
>
>
>
>
> -----Original Message-----
> From: David Ladd <drencor at gamepixel.net>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Sent: Thu, Apr 18, 2013 5:56 pm
> Subject: Re: [Coco] [COCO} VCC 1.43beta release
>
>
> On Thu, Apr 18, 2013 at 4:49 PM, Bill Pierce <ooogalapasooo at aol.com>
> wrote:
>
> >
> > On another note, the new Vcc will now support Midi through DriveWire 4.
> > Both Ultimuse 3 and the latest release of Lyra and their jukeboxes
> support
> > this. Both are available on my site (below) as well as the Sound Chaser
> > Multi Format Music Player. Sound Chaser has been coughing on the Becker
> > Port in Vcc lately and I'm working on it.
> >
> > Bill Pierce
> > My Music from the Tandy/Radio Shack Color Computer 2 & 3
> > https://sites.google.com/site/dabarnstudio/
> > Co-Webmaster of The TRS-80 Color Computer Archive
> > http://www.colorcomputerarchive.com/
> > Co-Contributor, Co-Editor for CocoPedia
> > http://www.cocopedia.com/wiki/index.php/Main_Page
> > E-Mail: ooogalapasooo at aol.com
> >
>
> Also another thing that might help people with this is there is already a
> DriveWire4 disk image ready to load into slot 0. Just use the external
> hdbdw3bc3.rom file in the external rom in the floppy controller of VCC.
> Then when it boots up you should be able to just type DOS and be up and
> running ready to go.  The ROM offsets should be the same in HDBDOS 1.4 so
> you could patch the ROM's to also use DriveWireServer as a external HDD.
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>



-- 
Long live the CoCo