[Coco] Booting NitrOS-9 from MESS

[Mike Rowen]

No, I did not rename them. I will do that and retry this evening. Thanks.

On Sep 26, 2012, at 10:34 AM, Aaron Wolfe <aawolfe at gmail.com> wrote:

> That's what happens if you do not rename the images to end in .os9
> rather than .dsk... did you rename them?
> 
> 
> 
> On Wed, Sep 26, 2012 at 11:23 AM, Mike Rowen <mike at bcmr3.net> wrote:
>> I am using the 6809 L2 .dsk images from the NitrOS9 sourceforge site. I start mess with the two disks in flop1 & flop2. When I type DOS to boot, it simply returns to the DECB OK prompt, no errors.
>> 
>> On Sep 26, 2012, at 9:18 AM, Robert Gault <robert.gault at att.net> wrote:
>> 
>>> Mike Rowen wrote:
>>>> Hello all,
>>>> 
>>>> I have MESS 147s compiled and running under Linux. I can bring up the CoCo
>>>> 3 emulator and I can access disk images,
>>>> however I have run into the MESS boot bug for NitrOS-9. I have found
>>>> references to the bug, but not the fix. I know some
>>>> of you on the list are running NitrOS9 in MESS. Any help is appreciated.
>>>> Thanks!
>>>> 
>>>> Regards,
>>>> -Mike
>>> 
>>> Any OS-9 disk image for MESS should use the .os9 extension. That should solve most problems.
>>> 
>>> The current nightly build disk images for NitrOS-9 have bugs. The Level2 images seem to be based on Level3 since CoGrf is present instead of CoWin and CoVDG. Also the disk descriptors are bad in that there are 3 D0 and 2 DD in OS-9 boot.
>>> 
>>> Which disks are you trying to boot? What information are you seeing on the screen? Are you trying to boot from "floppies" or .vhd images?
>>> 
>>> 
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/mailman/listinfo/coco
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco