[Coco] I am a dirty coward. Give me courage.

[Juan Castro]

...but I'll still be able to put a replacement PCB in, right?

(Come on, call the Inquisition now. I... expect it. HAH!)

On Tue, Nov 13, 2012 at 11:26 AM, Boisy G. Pitre <boisy at tee-boy.com> wrote:
> Hey Juan,
>
> What you are doing is considered sacrilege! :)
>
> You'll find that once you tear into the cartridge (yes, it takes some force to separate the two halves once the screw is removed), it will likely not have a 24 or 28 pin ROM socket, but a tiny epoxy blob which will make your experimenting a bit more interesting.
>
> The cartridges that tend to have the 28 pin ROMs are the newer CoCo 3 carts like Shanghai and Thexder.  Before you take a cart apart, pull back the card edge cover at the bottom of the cart and hold it to a strong light, then peek on the inside top of the motherboard.  If you see a tiny black blob, you know it's not the cartridge board with the  PROM, so it's probably best to leave it be.
>
> On Nov 13, 2012, at 7:20 AM, Juan Castro <jccyc1965 at gmail.com> wrote:
>
>> I bought a bunch of cartridges like this one: http://i.imgur.com/dkWPr.jpg
>>
>> I want to open them up to maybe play with ROM replacing, but after
>> taking off the screw the two halves seem to feel no inclination to
>> come apart gently. I don't want to break them. What's the best way to
>> do this?
>>
>> By the way, all of them work and I want to save the ROMs for
>> posterity. There's a Space Invaders-like game, an AstroBlaster-like
>> game, this one (Bust Out), a simple math game, and a... spreadsheet!
>>
>> Juan
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco