[Coco] Cloud9's DOS Adapter and CB/ECB

[Mark Marlette]

As I have checked most floppy controller units as to their fit with the DOS Apadter.

I have not checked this application.

These devices are very compact and suspect that you should have no problem placing them on the MB. As Bruce has pointed out, one for each ROM is required.

Addressing can be extended and yes they would be hand wires to the DOS Adapter's Axx address lines, which has places for the wire(s).

Regards,

Mark
http://www.cloud9tech.com




________________________________
 From: Bruce W. Calkins <brucewcalkins at charter.net>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com> 
Sent: Wednesday, November 7, 2012 6:05 AM
Subject: Re: [Coco] Cloud9's DOS Adapter and CB/ECB
 
The addressing to those sockets is hardwired for 8k ROMs.  Aside from that you should be able to do it.  However, you may need one for each socket to play with both CB and ECB at the same time.

Bruce W.

=========================

----- Original Message ----- From: "Juan Castro"

> Could I use this...
> http://www.frontiernet.net/~mmarlette/Cloud-9/Hardware/DOS%20Adapter.html
> ...on this (my CoCo 1)...
> https://picasaweb.google.com/lh/photo/t2sguazn9-xPatDBo3ShKW9XcHdiH80reA6_ygAbi6M
> ...to play with hacked CB and ECB ROMs? Looks like there might be
> space problems.
> 
> Juan 


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco