[Coco] eprom programmer

[Darren A]

On Fri, Mar 23, 2012 at 6:20 PM, Frank Pittel wrote:
> I've managed to accumulate a number of floppy controllers with at least a couple of 502s.
> It's in fact one of my 502 controllers that I intend to put the 27128 with drivewire into.
> Is there a better eprom to use?
>

The 27128 is a 16K EPROM.  An unmodified FD-502 will only see the
upper 8K of that device, so make sure you burn to either the upper
half or both halves and everything should work fine.

Darren