[Coco] Laptop Saga, 512K Basic
Darren A
mechacoco at gmail.com
Thu Aug 23 09:42:08 EDT 2012
On Thu, Aug 23, 2012 at 7:18 AM, <jdaggett at ...> wrote:
> On 23 Aug 2012 at 6:10, Kip Koon wrote:
>
>> The XC9500 series is such a big chip. I can't possibly use all the pins
>> in my project. al-williams.com has a little board that can plug one side
>> into a breadboard. The other three sides have to be wired manually to the
>> breadboard. I'd like to find some type of quad to dip adapter to use for
>> breadboarding purposes. Does anyone know of such an adapter I can use to
>> plug all pins of the XC95xx chip directly into my breadboard?
>
>
> Kip
>
> There is no way that you will find a 84 pin PLCC to 0.6inch wide DIP adaptor that will not cost
> you and arm and a leg. Any of the professional services that would offer such a product
> would be well over $100 if not over $200 per unit.
>
Here is one for $20 Canadian:
http://tinyurl.com/9pzeu9x
I have used their PLCC-44 adapter. The difficulty with these is having
to route wires around the adapter.
Darren
More information about the Coco
mailing list