[Coco] Toolshed help

[Bob Devries]

Somewhere on the net there should be a utility which I wrote called LSN0. 
I'll dig around to see if I can find it here. It decodes the first logical 
sector (hench the name lsn0) and prints what it decodes.

Regards, Bob Devries
Dalby, QLD, Australia

----- Original Message ----- 
From: "Stephen H. Fischer" <SFischer1 at Mindspring.com>
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Sent: Thursday, June 09, 2011 2:43 PM
Subject: Re: [Coco] Toolshed help


> Hi,
>
> I looked at "dnc" (Disk name Change), written in "C" on my SHF80 disk.
>
> /*
> *** dnc - disk name change.
> *
> * This program will rename a disk after a "BACKUP"
> * so than the new disk will not have the save name as the old.
> *
> * Ron Voigts August 1985.
> * '68 Micro Journal december 1985.
> *
> */
>
> It reads and writes sector 0 using ~ "/D0@".
>
> I have nothing against BASIC09, just noting that an alternate written in 
> "C" could start with lots of the work already done.
>
> SHF
>
> ----- Original Message ----- 
> From: "gene heskett" <gheskett at wdtv.com>
> To: <coco at maltedmedia.com>
> Sent: Wednesday, June 08, 2011 7:14 PM
> Subject: Re: [Coco] Toolshed help
>
>
>> On Wednesday, June 08, 2011 10:12:40 PM Stephen H. Fischer did opine:
>>
>>> Hi,
>>>
>>> I was asking my self the other day if we have a utility to present this
>>> sector 0 information in a useful manner without resorting to ded.
>>>
>>> SHF
>>>
>> Yes, sort of elderly, dtype, written in b09.  See one of my earlier posts
>> for a sample of its output.
>>>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco