[Coco] Drivewire 3 Question

Frank Pittel fwp at deepthought.com
Thu Nov 18 15:41:29 EST 2010


I haven't looked at toolshed lately so my memory may be flawed but that ability should
exist as part of toolshed.

The Other Frank



On Thu, Nov 18, 2010 at 03:02:15PM -0500, Aaron Wolfe wrote:
> I could write a small utility to load and save individual .DSK files
> in and out of a 256 disk virtual image file, if that would help.
> -Aaron
> 
> 
> On Thu, Nov 18, 2010 at 2:34 PM, Derek <dml_68 at yahoo.com> wrote:
> > Mike,
> >
> > I mount the HD.dsk image in DW3 Slot number 3. And that .dsk image has drive letters assigned1 to 255.  So I can switch between them by using DRIVE # command. When I use a real coco disk and use the HGB-DOS Drive on-Off command I can make it so that the real Coco disk drive is assigned drive 0 so that makes it easy to copy real disks to the virtual image using the backup command backup 0 to 20 for example.
> >
> > What the problem I have is with multiple disk images mounted in DW3 is that the HD disk image has drives 0 to 255 and the other virtual floppy disk image I mount in another DW3 slot is looked at as drive 0 as well. So there is a conflict when working with multiple virtual images in DW3 itself.
> >
> > I will check out the utility link you sent and see. thank you!
> >
> >
> >
> > ** Mistrust Authority. Promote Decentralization **
> >
> >
> >
> >
> > --- On Thu, 11/18/10, Mike Rowen <mike at bcmr3.net> wrote:
> >
> > From: Mike Rowen <mike at bcmr3.net>
> > Subject: Re: [Coco] Drivewire 3 Question
> > To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
> > Date: Thursday, November 18, 2010, 9:58 AM
> >
> > The decb.exe utility should allow you to copy files from your hd .dsk file
> > and your PC OS. Then you could mount these images separately in DW. Hope
> > this helps. I may be misunderstanding what you're attempting to do though.
> >
> > Cheers,
> > -Mike
> >
> > On Thu, Nov 18, 2010 at 12:28 PM, Mike Rowen <mike at bcmr3.net> wrote:
> >
> >> I re-read your message, Derek. Do you have a virtual HD that's has .dsk
> >> files in it when you do a directory?
> >>
> >>
> >> On Thu, Nov 18, 2010 at 12:10 PM, Derek <dml_68 at yahoo.com> wrote:
> >>
> >>> Well after trying for a few days I have broken down and decided to ask for
> >>> help.
> >>>
> >>> I have Drivewire 3 hooked up and running on my Coco 3. I have a virtual
> >>> .dsk disk image that DW3 sees as a virtual HD with the 255 seperate virtual
> >>> disks in the file. I have been able to get DW3 to copy back and forth with
> >>> my real Coco disk drives after I got the commands figured out.
> >>>
> >>> What I want to do and cant seem to get done is copying between virtual
> >>> disk images mounted in DW3 server software. So I can take .dsk images and
> >>> copy the games over to the virtual HD image file.
> >>>
> >>> Right now I am mounting a disk image, copying to a real floppy disk, then
> >>> mounting the virtual HD image and copying from the real floppy to the HD
> >>> disk image.
> >>>
> >>> I am doing all this in RS-DOS not in OS-9.
> >>>
> >>> Thank you
> >>>
> >>> Derek
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> --
> >>> Coco mailing list
> >>> Coco at maltedmedia.com
> >>> http://five.pairlist.net/mailman/listinfo/coco
> >>>
> >>
> >>
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
> >
> >
> >
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco



More information about the Coco mailing list