[Coco] SVGA monitor

[RJRTTY at aol.com]

In a message dated 10/24/2009 2:40:33 P.M. Eastern Daylight Time,  
snhirsch at gmail.com writes:



>I have questions about that.  I bought one of these boards on eBay  and 
the 
>unit I received is behaving very poorly.  It resets  randomly and will not 
>display the CoCo output.

>Color me  unimpressed.
 
 
It is likely the output of the coco3 is overdriving the input of
your converter.    I have run into this problem with  other
commercial converters.    Try putting a 75 ohm  resistor
in series in each of the RGB lines and see if that helps.
 
Roy