[Coco] MESS

[Darren A]

On 3/17/09, George Ramsower  wrote:
>
>  I use a "No Halt" DSC2 on the CNC machine. The address conflicts with the
> hard drive coco so it won't boot. The Hard drive coco uses a Ken Ton
> controller and requires a different address than what would be used on the
> CNC machine. So the boots are not compatible..... DARNIT!!
>

If the disk image you are using under MESS switches to use the No HALT
capability of the SC2 then that would be a problem.  MESS doesn't
emulate the advanced features of the SC2.

Darren