[Coco] Coco3 emulator

[Mike Pepe]

Make sure you've got CPU microcode update enabled in the BIOS. I had all
sorts of NTVDM issues because that option was disabled. (AMD cpu
specifically)

If you open a 16 bit command prompt, do you get the NTVDM issues? (start
-> run -> command)

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com]
On Behalf Of Bill
Sent: Monday, March 02, 2009 1:16 PM
To: 'CoCoList for Color Computer Enthusiasts'
Subject: Re: [Coco] Coco3 emulator

Well, I did all that, and still nothing. 

> -----Original Message-----
> From: coco-bounces at maltedmedia.com [mailto:coco-
> bounces at maltedmedia.com] On Behalf Of Robert Gault
> Sent: Monday, March 02, 2009 3:59 PM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Coco3 emulator
> 
> There are several versions of the Vavasour Coco3 emulator but that
> might
> not be the issue. To run this under WinXP, you must provide the
correct
> environment. That requires you to edit the file CONFIG.NT (should be
in
> Windows\System32).
> 
> dos=high, umb
> device=%SystemRoot%\system32\himem.sys
> files=100
> 
> 
> Create a shortcut file with the following memory settings.
> "Auto" for all memory entries and check the box "uses HMA".
> 
> You will probably want to have an empty file named 2Megs in the same
> directory as the program.


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco