[Coco] My CoCo plans - Looking for advice and insight.

[Frank Pittel]

Unfortunatly you'll also need a floppy drive when using hdb-dos to move files
between a drivewire drive and your CF card. Unfortunatly hdb-dos only supports
one or the other.


On Sun, Apr 05, 2009 at 11:00:27AM -0700, Jim Cox wrote:
> Hi Frank,
> 
> Yeah, I figured I would need a disk drive to set up the SuperIDE with
> HBD-DOS, and NitrOS-9.  After that is done, I should only need to use a disk
> drive locally only if I am not using Drive Wire, or at least that is my
> hope.
> 
> I believe some Basic programs may require a local disk drive, but those are
> mostly games from what I have picked up from the list.
> 
> Cheers,
> 
> Jim Cox
> http://miba51.blogspot.com/
> http://geekswhocare.blogspot.com/
> http://8-bit-retro-computing.blogspot.com/
> 
> 
> On Sun, Apr 5, 2009 at 10:45 AM, Frank Pittel <fwp at deepthought.com> wrote:
> 
> >
> > You will need at least one floppy drive to set things up. The setup program
> > for hdb dos will help you the offset. I would also suggest that you install
> > the hdb-dos rom image in one of the flash banks on your Superide. This way
> > you can start your coco and access the superide without a floppy.
> >
> > Frank
> >
> >
> > On Sun, Apr 05, 2009 at 09:51:31AM -0700, Jim Cox wrote:
> > > My plan is to set up my CoCo system so that it will boot into HBD-D0S
> > and/or
> > > NitrOS-9 from a SuperIDE.  I know I need to load the images of HBD-DOS /
> > > NitrOS-9 onto a CF card connected to my SuperIDE.
> > >
> > > Once the CoCo has booted up, I then want it to be able to connect my CoCo
> > > system to a PC via DriveWire.  The host PC is a Dell GX100 with Windows
> > > 2000, and has the ability to recognize 360K 5 1/4 and 720K 3 1/3 drives.
> >  I
> > > plan to run MESS and VCC on this PC, and possibly other emulators and
> > > development apps.
> > >
> > > I don't want anyone to tell me how to do this, because that would take
> > the
> > > fun out of it.  What I could use though is some advice and insight about
> > > what I need to consider when setting up the CoCo system as I described.
> > >
> > > I know that RTFMs will be required, so no need to repeat that :-)
> > >
> > > How helpful will an MPI be in this configuration?  Should I also connect
> > > disk drives to the CoCo?  Any hints about driver issues?
> > >
> > > Cheers,
> > >
> > > Jim Cox
> > > http://miba51.blogspot.com/
> > > http://geekswhocare.blogspot.com/
> > > http://8-bit-retro-computing.blogspot.com/
> > >
> > > --
> > > Coco mailing list
> > > Coco at maltedmedia.com
> > > http://five.pairlist.net/mailman/listinfo/coco
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco