[Coco] Disto super II 4in1 adapter.

[Stephen Castello]

On Wed, 08 Oct 2008 01:50:59 GMT, "tonym" <tonym at compusource.net> had
a flock of green cheek conures squawk out:

>>-----Original Message-----
>>From: Roger Taylor operator at coco3.com
>>Sent 10/7/2008 9:31:35 PM
>>To: CoCoList for Color Computer Enthusiasts coco at maltedmedia.com
>>Subject: Re: [Coco] Disto super II 4in1 adapter.
>>
>>At 07:44 PM 10/7/2008, you wrote:
>>Some one was looking for the 4in1 daughter card for the Disto Super 
>>II controller. For the life of me I can't find who it was!
>>Any way if you read this and still need one, give me a reply.
>>
>>Tim fadden
>>
>>
>>
>>Can someone take a good picture of a 4-in-1 and post the URL? I have 
>>a daughterboard in my Super Controller (1?) and can only confirm that 
>>since it has a battery that is has a real-time clock, but I don't 
>>know what else it has. The connector on the side of the 
>>daughterboard looks like an IDE header, 17 x 2 pins with 4 pins missing.
>>
>
>Roger - 
>an RTime, has a clock, and that 17x2 header, which is a parallel.
>A 3-in-1, has the clock, the 17x2 header parallel, and then a 4x2 (I think) right behind the 17x2, which is a serial
>A 4-in-1 I haven't actually SEEN.... but I assume there's gotta be a SCSI connector somewhere... it's RTC/Ser/Par/SCSI
>
>As you all know, I've been whining here, coco3.com forums, vintage-computer, cctalk, and about everywhere else,
>looking for one :)
>
>
>Tony

And don't forget the 2-in-1 has RS-232 and SCSI.  I have one of those.
-- 

Stephen