[Coco] 2764 EPROM

[Mark Marlette]

Make sure you have the card edge fingers gold plated. Anything else  
will not be reliable.

Mark
Cloud-9


Quoting "Darren A." <darccml at hotmail.com>:

>> From: "Joef6809"
>> Subject: Re: [Coco] 2764 EPROM
>> Date: Mon, 10 Sep 2007 03:26:04 -0400
>>
>> I was actually thinking more like this.
>> http://vcc6809.bravehost.com/Pics/ide.html
>> Some hand work would be needed to get the final shape but I think   
>> it will work out well.
>> I figure at worst I'll waist $60.00
>>
> --
>
> For prototyping, it would cost about $20 more to get two boards made
> and have them cut the outline and slots for you.
>
> Later, if you want to produce several boards, the Standard service will
> definitely save you money. It would cost about $177 for 9 MiniBoards
> (which you would have to trim yourself), whereas with the Standard
> service, you could get 10 boards (machine trimmed) for about $137.
>
> _________________________________________________________________
> Get a FREE small business Web site and more from Microsoft® Office   
> Live! http://clk.atdmt.com/MRT/go/aub0930003811mrt/direct/01/