[Coco] [Color Computer] [coco] SCSI trouble

[Joel Ewy]

George's Coco Address wrote:
>
> ----- Original Message ----- From: "George's Coco Address"
>
>> I use a Ken-Ton SCSI interface on one of my coco3 machines under OS9
>> L2. In
>> a recent attempt to backup the hard drive (ST138N) to another, external
>> ST138N, I discovered that I could not access the external drive and the
>> internal drive is being accessed as both /h0 and /h1.
>> This system used to work, but it was a long time ago since I did a
>> backup.
>>
>> Any suggestions as to what may cause this problem?
>>
SCSI bus termination?

JCE
>> George
>
> Just now, using dmode, I changed drv to $02 and $03 on the /dd /h0 and
> /h1 device descriptors and the /h0 drive was always present. I'm
> guessing at this point that there may be a problem with the drive
> itself.  Later, I'll replace that drive with the other one and see if
> the problem persists.
> This CC3 is a repack in a PC case. The /h0 drive is in that case. The
> /h1 drive is in an external case.
>
> George
>
>
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>