[Coco] [Color Computer] Repairing my Coco 3...

[Al Hartman]

Good point!

I'm going to open it up to de-solder the processor. Before I do 
that, I'll check to see if it has a 512k Module and make sure it's 
seated properly.

Al

--- In ColorComputer at yahoogroups.com, Stephen Castello 
<zootzoot at ...> wrote:
>
> On Tue, 26 Sep 2006 01:43:00 +0000, Al Hartman <alhartman at ...>
> had a flock of green cheek conures squawk out:
> 
> >My Coco 3 powers up to a garbage screen, and I've tried swapping 
the 
> >GIME chip and it doesn't help. So, it looks like a bad 6809e 
processor.
> >
> 
> Does it have 512kb?  If it does, the pins from the memory board are
> not making good contact.
> 
> Stephen
> --
>






Brought to you by the 6809, the 6803 and their cousins! 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ColorComputer/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ColorComputer/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:ColorComputer-digest at yahoogroups.com 
    mailto:ColorComputer-fullfeatured at yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    ColorComputer-unsubscribe at yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/