[Coco] Multi-Pak Modification to work with a CoCo 3 (model No.26-3124)

[Bert & Peggy Schneider]

Thanks - I'll try that.  I'm good at soldering.

Bert

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com]
On Behalf Of Mark Marlette
Sent: Wednesday, May 03, 2006 11:55 AM
To: coco at maltedmedia.com
Subject: Re: [Coco] Multi-Pak Modification to work with a CoCo 3 (model
No.26-3124)

Bob,

The 3124 is not the pop in PAL replacement, that is the 3024.

Bert, go to Paul Barton's web site and get his article on the upgrade.

Mark

Quoting Robert Emery <theother_bob at yahoo.com>:

>
>> I've seen two different web pages with information on how to modify a
>> Multi-Pak to work with a CoCo 3.
>>
>> What is the best way to make this modification?
>>
>
> Depends how you qualify "best"...
>
> The "easy" way is to buy a replacement PAL/GAL chip and just remove 
> the old one
> and pop in the new one.
>
> The "cheap" way is to solder in a 74LSxx (I forget the exact chip, 
> even though
> I have done this mod myself) and a few small bits of wire.
>
> With moderate soldering skills and costing under $1, I consider #2 the
best
> method. Someone less technically inclined might prefer the 
> replacement chip as
> the best method. Either method yields the same result... a working 
> MPI for your
> CoCo3.
>
> cheers,
> Bob
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>




-- 
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco