[coco] advice needed

[Kevin Diggs]

RJRTTY at aol.com wrote:
>  
> In a message dated 10/31/05 12:38:25 P.M. Eastern Standard Time,  
> mark at cloud9tech.com writes:
> 
> 
> I  would add a jumper to allow this feature or not.
> 
> This way the end user  has an option........
> 
> 
> 
> 
> I just may do that on the next version.    I have ten boards  counting
> the one I sent you to go through first.
>  
> thanks
> Roy
>  
> 
	Do you have to change the hardware depending on whether you use an I2C 
command or just hold the line low? If you use a command then the jumper 
is not necessary. You just don't issue the command.

					kevin