[Coco] Re: Color Computer 3 prototype

[jdaggett at gate.net]

Torsten

No problem with the wire wrap. 

Yes there appears to be a 9 pin VGA and a RCA jack for composite 
video. There appears to be no RF modulator, so the board would 
not hookup to a TV through channel 3/4.

The board is labeled w i th the IC number. Y ou can remove the 
tags and not loose any info. It is a comon thing to  stick tags on 
important ICs so t hat it is easy to locate them when debugging 
software. 

james


On 21 Jan 2005 at 13:27, Torsten Dittel wrote:

To:             	coco at maltedmedia.com
From:           	Torsten Dittel <Torsten at Dittel.info>
Date sent:      	Fri, 21 Jan 2005 13:27:54 +0100
Subject:        	[Coco] Re: Color Computer 3 prototype
Send reply to:  	CoCoList for Color Computer Enthusiasts 
<coco at maltedmedia.com>
	<mailto:coco-
request at maltedmedia.com?subject=unsubscribe>
	<mailto:coco-
request at maltedmedia.com?subject=subscribe>

> I suggest this is the first thing to do: take a photo of all the
> stickers and where they have been placed (maybe this helps later to
> figure out a system *why* some ICs have been marked (I guess it's kind
> of "tested" or "updated"). Then: remove carefully the stickers and
> have a look on the chip numbers. Whew, I wouldn't dare to touch this
> UFO with all this wire wrapping... I wonder if all wires are still in
> place. Is there any kind of video output connector visible?