[Coco] [Color Computer] Load files .bas

[Pierre Fortin]

OK, I solved the problem to transfer .bas files and .bin of Pc in my 
coco3. I did not use good option with key them " F7 and F8 " under 
"Port.exe".

I progress quietly:o)


Ok, j'ai réglé le problème pour transférer des fichiers .bas et .bin de 
Pc à mon coco3. Je n'utilisait pas les bonne option avec les touche "F7 
et F8" sous "Port.exe".

Je progresse tranquillement:o)


Pierre Fortin a écrit :

> Finally that works now:o)))
>
> After the starting up of Port.exe I have to type " b: " for my reader 5
> ¼ and then I was able to copy the prog " GET3ROM.BAS " to the floppy
> disk and then to execute this prog on my truth coco3 and that worked.
>
> I was then able to copy my 2 file COCO3. ROM and DISK.ROM on my Pc and
> the whole works now but only under Windows because I work under Linux
> (Mandrake 10.0) and even with the emulator " xdosemu " character are
> bizarre and illegible in the emulator, there are lots of symbol as
> bottom then...
>
> If I copy a file .bas (with Port.exe) on a floppy disk 5 ¼ and what I
> essay(attempt,try) to load(charge) the .bas on the truth coco3, that
> does not work. The reader turns(shoots) and then he posts(shows) "OK", I
> type "LIST", nothing displays, I type "RUN" and there is nothing.
>
> Why?
>
> Having copied a .dsk file (with Port.exe) to floppy disk 5 ¼, how to use
> this .dsk file with the truth coco3?
>
> Thank you for your help Robert
>
>
> French:
>
> Finalement ça fonctionne maintenant:o)))
>
> Après le démarrage de Port.exe j'ai tapé "b:" pour mon lecteur 5¼ et
> ensuite j'ai pu copier le prog "GET3ROM.BAS" sur la disquette et ensuite
> exectuer ce prog sur mon vrai coco3 et ça fonctionné.
>
> J'ai pu ensuite copier mes 2 fichier COCO3.ROM et DISK.ROM sur mon Pc et
> le tout fonctionne maintenant mais seulement sous Windows car je travail
> sous Linux(Mandrake 10.0) et même avec l'émulateur "xdosemu" les
> caractère sont bizarre et illisible dans l'émulateur, il y a plein de
> symbole comme fond alors...
>
> Si je copie un fichier .bas(avec Port.exe) sur une disquette 5¼ et que
> j'essai de charger le .bas sur le vrai coco3, ça ne fonctionne pas. Le
> lecteur tourne et ensuite il affiche "OK", je  tape "LIST", rien ne
> s'affiche, je tape "RUN" et il ne se passe rien.
>
> Pourquoi?
>
> Après avoir copié un fichier .dsk(avec Port.exe) sur disquette 5¼,
> comment faire pour utiliser ce fichier .dsk avec le vrai coco3.
>
> Merci pour ton aide Robert
>
>
>
> Robert Emery a écrit :
>
> >
> > --- Pierre Fortin <pierrefortin at altern.org> wrote:
> > >
> > > Ok tim,
> > >
> > > Avec le programme "Port.exe", seule les fichiers .dsk sont visible,
> > > comment faire pour voire le fichier "GET3ROM.BAS"?
> > >
> > > Merci
> > >
> > > English:
> > >
> > > With the program " Port.exe ", only files .dsk are visible, how even
> > the
> > > file " GET3ROM.BAS "?
> > >
> > > Thank you
> >
> > Pierre,
> >
> > I hope this translates ok... I'd translate it myself, but I'd probably
> > pick a
> > translator that would tell you "my hovercraft is full of eels."
> >
> > When you run PORT.EXE, the first thing to do is select a CoCo diskette
> > that you
> > want to read and write files to. You can use a real diskette in the 
> floppy
> > drive, or a virtual one such as "diskname.dsk". You can type A: (or 
> B: or
> > diskname.dsk) and press Enter and you should see the contents of the 
> CoCo
> > diskette in the middle column.
> >
> > I will assume you have a 5.25" disk drive on the CoCo and the PC, and
> > you want
> > to use a real diskette, since you need to use GET3ROM.BAS on a real
> > CoCo3. You
> > may need to tell you computer BIOS that the 5.25" drive is a 720K 3.5"
> > drive.
> > This is due to an error in Jeff V's emulator. This has been corrected
> > by John
> > Collyer, who has released an updated CoCo3 emulator based on Jeff's.
> >
> > After PORT.EXE starts and you have a CoCo diskette directory in the 
> middle
> > column, use the right side column to choose files on the PC that you
> > want to
> > copy to the CoCo diskette.
> >
> > .BAS files on the PC side may be ASCII or tokenized basic (binary).
> > Open the
> > BAS file in a text editor. If you can read it, it is ASCII. If it
> > looks like
> > garbage, it is tokenized Basic. You must use the appropiate setting or
> > the CoCo
> > won't be able to read the file.
> >
> > Keep trying, we'll help you get it working!
> >
> > cheers,
> > Bob Emery
>



Brought to you by the 6809, the 6803 and their cousins! 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ColorComputer/

<*> To unsubscribe from this group, send an email to:
    ColorComputer-unsubscribe at yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/