[Coco] Re: Re: Re: Nitros9 3.02.02 problem

[Charlie]

Ok here are the results. I followed what you said exactly and everything
worked 100%. I booted this new disk and everything seems OK, but I still
have no access to /h0 error #208.

mdir show BBFhdisk and h0 in memory. I did run ded on os9boot again and went
to the rbf module and verified that the 25 was changed to a 21. It was.
I booted OS9 and Nitros9 3..02.01 again to make sure the harddisk wasnt
being stupid and it worked fine.

more ideas ???


"Boisy G. Pitre" <boisy at boisypitre.com> wrote in
message news:4A4A1CB1-DD00-11D8-AAA3-0003939F08E6 at boisypitre.com...
> Don't give up.  Try these steps:
>
> (1) Boot with your NitrOS-9 system master disk (not the customized boot
> disk you made)
> (2) at the shell, type: load ded
> (3) take out the disk and insert your customized boot disk
> (4) once inserted, type:  ded /d0/os9boot
> (5) When ded presents the screen full of data, type the l key (as in
> 'l'ink)
> (6) ded asks "Link to which module?" type: rbf  then press ENTER
> (7) Now you are editing RBF in the os9boot file.  Type s (as in
> 's'ector)
> (8) ded asks "SECTOR = $"  type 7 then press ENTER
> (9) Now you should be at LSN=$07 at the top of the screen.
> (10) Press e as in 'e'dit.  The cursor appears at the top
> (11) move down to offset C5.
> (12) That location should have 25.  Type: 21 and press ENTER
> (13) Type w as in 'w'rite.  Ded asks are you sure?  type Y
> (13) type v as in 'v'erify
> (14) type q as in 'q'uit
> (15) reset and boot.
>
> Boisy
>
> On Jul 23, 2004, at 6:11 PM, Charlie wrote:
>
> > Hi again.
> >
> > This didn't work for me.
> > I made a boot disk that included the bbfhdisk.dr and h0.dd for my
> > harddrive.
> > Of course it didnt work cause it needs to be patched as you said. So, I
> > copied debug,cobbler and ded to the cmds directory of the new boot
> > disk. I
> > then booted the disk and started to do what you described. I got an
> > error on
> > the cobbler /d0 step. Cobbler gave me an error about it being
> > fragmented.
> >
> > Looks like I'll have to wait for the next release of Nitros9, unless
> > there
> > is a way around that.
> >
> > Charlie
> >
> > "Robert Gault" <robert.gault at worldnet.att.net>
wrote
> > in message
news:410107E5.6030604 at worldnet.att.net...
> >> Charlie wrote:
> >>> Thanks for the reply! Can you explain to me exactly how to "patch"
> >>> RBF?
> > I'm
> >>> using the 6809L2 and would be booting from the Nitros9 disk as
> > downloaded
> >>> from Nitros9.org
> >>>
> >>> Thanks
> >>> Charlie
> >>>
> >>>
> >>> "Boisy G. Pitre" <boisy at boisypitre.com> wrote
> > in
> >>> message
> >
news:EE8B8F14-DC52-11D8-AAA3-0003939F08E6 at boisypitre.com...
> >>>
> >>>> Charlie,
> >>>>
> >>>> This is the result of a bug in RBF that was introduced in 3.2.2.  I
> >>>> posted a fix a couple of days ago to the list...
> >>>>
> >>>>
> >>>>> debug
> >>>>> L RBF
> >>>>> . .+795  (that is period space period+795)
> >>>>> =21
> >>>>> Q
> >>
> >> The sequence that Boisy gave is the method for making the patch. Debug
> >> is a program which comes with the package. The command sequence is
> >> debug
> >> L RBF                 which links to the rbf module
> >> . .+7C5               moves forward $7C5 bytes to the byte needing
> >> change
> >> =21                   indicates to change the value to 21
> >> Q                     leaves Debug
> >>
> >> This leaves you with a patched rbf in memory but with a bad crc. Boisy
> >> forgot to mention you must now save this change to make things
> >> permanent.
> >>
> >> cobbler /d0             if that is the boot drive
> >> dEd /d0/os9boot         dEd is on your disk
> >> L rbf                   tell ded to link to the rbf module
> >> V                       verify the module
> >> Q                       leave dEd
> >>
> >> Your change is now permanent and rbf has a good crc value.
> >>
> >> There is a slightly shorter route if you use modpatch to make the byte
> >> change because modpatch contains a verify command.
> >>
> >>
> >> -- 
> >> Coco mailing list
> >> Coco at maltedmedia.com
> >> http://five.pairlist.net/mailman/listinfo/coco
> >>
> >
> >
> >
> >
> > -- 
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
>
>
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>