[Coco] OS9 Files
John Donaldson
jadonaldson at charter.net
Fri Jul 16 14:41:10 EDT 2004
Robert,
That is what I am using. BTW transfering ascii test files to/from OS9
works great. It is only
when I try and copy a binary file from MSDOS to OS9 that I get the
MODULE HEADER ERROR.
The version I am using is Ver 2.06 Dated July 13, 1995.
John Donaldson
Robert Gault wrote:
> John Donaldson wrote:
>
>> I found it and it does work except when I do a Ident on the file
>> under NITROS9 it says teh CRC
>> is good but then gives an error that says the Module Header is BAD.
>> If I attempt to run the program
>> it blows up. Could be the utility AR, I tried to copy over. I copied
>> from MSDOS to a DSK. Don't
>> know if it makes a difference or not. I was able to successfully move
>> a text file from NITROS9 to MSDOS. It could be the file was bad to
>> begin with. I'll try others tonight.
>>
>> John Donaldson
>>
>>
>> Robert Gault wrote:
>>
>>> John Donaldson wrote:
>>>
>>>> Which MSDOS utilit do I use to move OS9 files ont a formated OS9
>>>> disk or DSK. I want to
>>>> start moving files off the CDROM that I got from Br. Jermery onto
>>>> the emulator.
>>>> I tried PORT.exe but it seem to only want to use a standard
>>>> COCO3 Disk Format and not
>>>> OS9.
>>>>
>>>> John Donaldson
>>>>
>>>>
>>>>
>>> There is a program OS9.EXE which runs on a PC that does the job
>>> nicely. If you can't find it on RTSI, let me know.
>>>
>>>
>>
>>
>>
>
> The program I referred to, OS9.EXE, runs on the PC not the Coco.
>
>
More information about the Coco
mailing list